Nederland 
Italia 
Deutschland 
España 
UK 
België (nl) 
Belgique (fr) 
United States 
France 
Sverige (en) 
Danmark (en) 
Österreich 
Portugal (en) 
Polska (en) 
Combi Argon 2
Race-derived, full-leather combi suit for sport street riders
Built upon the success of the Argon 2 entry-level, one-piece race suit we bring you the Argon combi. A full-leather, zip-together jacket...
Find out more
-
Class AAA certifiedAccording to the EN 17092-2:2020 standard
Key benefits
- Airbag compatible (go up one size)
- CE Class AAA-rated, two-piece design
- Extremely well ventilated
Key benefits
Features
Ready for Avertum Tech-Air® airbag system - ONE SIZE UP
Under this garment you can wear our REV'IT! Avertum Tech-Air® Airbag - or a Tech5 airbag - if you purchase the garment one size bigger than your usual size.
Ready for Avertum Tech-Air® airbag system - ONE SIZE UP
Features
Ready for Avertum Tech-Air® airbag system - ONE SIZE UP
If you wish to wear a garment that is marked as ""Ready for Avertum Tech-Air® airbag system"", you must be sure that the garment can accommodate the expansion of the airbag and therefore we recommend following below fit equation:
1. Measure chest circumference and divide the measurement by two;
2. Measure garment flat on chest line;
3. If the difference between point 1 and point 2 is 12 centimeters or bigger the garment is suitable to wear on top of the airbag.
Note: Please keep in mind that the garment should be purchased in the correct size in order for the shoulder and elbow protection to fit properly and best protect you in case of a crash. In order to create space for the expansion of the airbag, you can remove all separate layers (thermal liners, water proof liners) that can restrict the expansion of the airbag in the event of a crash. Remove the separate back protector in your garment, if any, when wearing the airbag (a back protector is included in the airbag) and adjust all adjustment straps on body to the widest position.
Product details
Product information
Built upon the success of the Argon 2 entry-level, one-piece race suit we bring you the Argon combi. A full-leather, zip-together jacket and pants outfit for sport street riders.
Good genes
The Argon 2 combi suit carries the same race aesthetic as part of the Argon 2 product family. We made a couple of changes to diversify the combi though. The prints are similar to the one-piece but reversed. More ergonomic perforation has been added to keep you cool plus the suit is build for high-speed riding, enabling the wearer to take corners at high speeds. How is that achieved? Well, the suit is aggressively pre-shaped and uses the same materials as the Argon 2 racing suit.
Future forward
Since we’re always thinking about what the future holds, we wanted to make sure that if you chose to outfit the Argon 2 with the Tech-Air® airbag, that you’d be able to. It’s actually our first combi suit that is specifically designed with Airbag compatibility in mind. The renewed shape and softer compound of the speedhump combined with additional stretch allow for it. And like with many of our garments that can make use of the airbag, we suggest going one size up to be on the safe side.
Built-in safety
With a AAA CE classification, you know you’re in good hands with the Argon 2 combi. Furthermore, knee sliders, interior armor at the elbows, shoulders, knees, and hips come standard, along with TPU protectors at the shoulders.
Good genes
The Argon 2 combi suit carries the same race aesthetic as part of the Argon 2 product family. We made a couple of changes to diversify the combi though. The prints are similar to the one-piece but reversed. More ergonomic perforation has been added to keep you cool plus the suit is build for high-speed riding, enabling the wearer to take corners at high speeds. How is that achieved? Well, the suit is aggressively pre-shaped and uses the same materials as the Argon 2 racing suit.
Future forward
Since we’re always thinking about what the future holds, we wanted to make sure that if you chose to outfit the Argon 2 with the Tech-Air® airbag, that you’d be able to. It’s actually our first combi suit that is specifically designed with Airbag compatibility in mind. The renewed shape and softer compound of the speedhump combined with additional stretch allow for it. And like with many of our garments that can make use of the airbag, we suggest going one size up to be on the safe side.
Built-in safety
With a AAA CE classification, you know you’re in good hands with the Argon 2 combi. Furthermore, knee sliders, interior armor at the elbows, shoulders, knees, and hips come standard, along with TPU protectors at the shoulders.
Fit of this product
Fit
Tight fitThe Tight fit is designed to be snug and conform to the rider's body shape. The contouring design ensures that the material and fabrics move with the body, without restricting the range of motion in any situation. This fit is mostly found in base layers and in our race-oriented garments.
Comfort features
Pockets
Inner pocketInner napoleon pocket
Two inner pockets
Lining
3D meshMesh
Features
Adjustable protector pocketsB-lock button closure at front
Calf zipper for easy entrance
This garment has an easy entrance zipper at the calves to more comfortably suit up despite its snug race fit. Simply unzip for extra room when suiting up, then zip it up when you’re ready to go.
Comfort collar
The comfort collar is added to products to offer more comfort in crucial places. An extra soft fabric is used for a cozy finish.
Comfort cuffs
Cuff zipper
The zipper at the cuff allows for easier entry into the sleeve and lets you wear the glove cuff under your outer shell and over your base layer.
Soft edge at collar
For extra comfort, the inside of the collar is covered with a soft fabric.
Speed hump
Stretchable cuff
Stretch at ankle
The stretch at the ankle of this garment allows for more freedom of movement and comfort when being worn, as well as easy on/off.
Stretch at armholes
Stretch at calf
Stretch at crotch
Stretch at inside arms
Stretch at inside knee
Stretch at inside of legs
Stretch at shoulders
Stretch at waist
Stretch lips at back
Stretch lips at knees
Climate regulation
Insulation
Wind catcher behind cuff zipperWind catcher behind front zipper
Behind the front a panel has been installed to block the wind.
Ventilation
Perforation on upper frontPWR|Fuse air mesh on speed hump
Protection in this product
Protection
Coccyx ProtectionDual comp knee slider type A
Dual-comp knee sliders type A are constructed from a high-performance TPU compound, combined with an extra durable PA6 compound. Specially designed for racers who want high-performance sliders, these higher-quality compounds offer good feedback, giving you maximum durability without compromising your feel on the road. The sliders come in a pair of two, each anatomically shaped to fit either the left or the right knee, and high-quality Velcro attaches the sliders to leathers, ensuring they stay where they need to. Type A sliders are available in three colours, to fit every colour combination of your leathers, and the dual-injected colours keep the design visible even when the sliders begin to wear.
Ready for Avertum Tech-Air® airbag system - ONE SIZE UP
Under this garment you can wear our REV'IT! Avertum Tech-Air® Airbag - or a Tech5 airbag - if you purchase the garment one size bigger than your usual size. If you wish to wear a garment that is marked as ""Ready for Avertum Tech-Air® airbag system"", you must be sure that the garment can accommodate the expansion of the airbag and therefore we recommend following below fit equation: 1. Measure chest circumference and divide the measurement by two; 2. Measure garment flat on chest line; 3. If the difference between point 1 and point 2 is 12 centimeters or bigger the garment is suitable to wear on top of the airbag. Note: Please keep in mind that the garment should be purchased in the correct size in order for the shoulder and elbow protection to fit properly and best protect you in case of a crash. In order to create space for the expansion of the airbag, you can remove all separate layers (thermal liners, water proof liners) that can restrict the expansion of the airbag in the event of a crash. Remove the separate back protector in your garment, if any, when wearing the airbag (a back protector is included in the airbag) and adjust all adjustment straps on body to the widest position.
Prepared for SEESOFT CE-level 1 Divided Insert Chest Protector
The protector pocket in this REV'IT! garment is tailor-made to accommodate the Divided Chest Protector SEESOFT CE-level 1 - an easy upgrade to maximize safety.
Prepared for SEESOFT CE-level 2 Insert Back Protector
The back protector pocket in this REV'IT! garment is tailor-made to accommodate the SEESOFT CE-level 2 back protector insert Type RV - an easy upgrade to maximize safety.
Safety seams
The stitching in motorcycle garments contributes greatly to the abrasion resistance of the total gear. This is why REV'IT! uses safety seams on garment areas at increased risk of impact. Safety seams have a visible as well as an invisible seam. This construction keeps the material of the outer shell together, even when the visible seam is thorn.
SEEFLEX CE-level 2 Elbow Protectors
Certified CE-level 2 according to the new norm EN 1621-1:2012 the SEEFLEX protector is the latest innovation from the in-house R&D department. The new norm also tests the impact levels in various temperature ranges. The SEEFLEX protectors easily surpass the new norm without sacrificing wearer comfort.
SEEFLEX CE-level 2 Shoulder Protectors
Certified CE-level 2 according to the new norm EN 1621-1:2012 the SEEFLEX protector is the latest innovation from the in-house R&D department. The new norm also tests the impact levels in various temperature ranges. The SEEFLEX protectors easily surpass the new norm without sacrificing wearer comfort.
SEEFLEX CE-level 2 Knee Protectors
Certified CE-level 2 according to the new norm EN 1621-1:2012 the SEEFLEX protector is the latest innovation from the in-house R&D department. The new norm also tests the impact levels in various temperature ranges. The SEEFLEX protectors easily surpass the new norm without sacrificing wearer comfort.
SEESMART CE-level 1 Hip Protectors
SEESMART hip protectors offer the highest level of flexibility while still passing the EN 1621-1:2012 CE-level 1 impact tests, in both normal and hot (T+) conditions.
TPU protection at shoulder
Outer shell material
Artificial LeatherA sythetic version of leather with a similar look.
Artificial nubuck
buffalo leather
Buffalo is a type of leather that distinguishes itself from cowhide with a more rugged appearance. The finish provides a classical look, allowing it to age beautifully.
Neoprene
Neoprene is a synthetic rubber useful for protective gear. It is abrasion-resistant, chemical-resistant, waterproof, somewhat stretchable, and buoyant.
Polyester stretch
wash & care
Outershell
 | Do not wash |
 | Do not bleach |
 | Do not tumble dry |
 | Do not iron |
 | Do not dry clean |
Warnings
| Make sure that your product is completely dry before you store it |
| Use REV'IT! designated (leather) cleaning agents only |
Certification
This garment is certified according to the EN 17092
Standard, published in 2020 and has achieved AAA
rating. For more details about certification click here.
Reviews
Write Your Own Review
